Carbon or wooden Torah case
In short: which to choose
Wood is the traditional choice: warm and familiar, from 19,000 ILS, with one year on the case body. Carbon is the structural choice: 3K and 12K plies cured in an autoclave, rigid and light relative to its strength, unaffected by humidity, at a 40,000 ILS base price — and never below 29,000 ILS for clients who also commission the writing of the scroll with us. If the scroll is in daily use, travels, or sits in a room with unstable conditions, choose carbon. If the community wants a traditional look, choose wood.
- Wooden case — from 19,000 ILS; one year on the case body under correct storage.
- Carbon case — 40,000 ILS base; never below 29,000 ILS and only for clients who also commission the writing of the scroll with us.
- Carbon shells: white, black, deep blue, grey, burgundy and green, pre-design.
- Carbon warranty — the case body and structure, under correct storage and use.
- In both materials the case is built to the measured internal and external dimensions of the actual scroll.
Durability and environment
Wood is a living material: it responds to humidity and temperature, and in unstable conditions can warp or crack over the years.
Cured carbon does not take up moisture the same way and holds its shape, so it suits rooms with intermittent air conditioning or changing humidity.
In both cases the recommended storage range is 15–30°C and 35%–60% humidity.
Weight and daily use
Carbon is light relative to its stiffness, so it is easier to take out and return frequently and to move between locations.
For a synagogue reading daily, or a scroll travelling to army units, institutions and abroad, that is the decisive advantage.
For a scroll that stays in the ark and comes out weekly, the practical difference is smaller and the decision is mostly appearance and tradition.
Appearance, design and finish
Wood allows carving, inlay and a warm classic look that suits established arks.
Carbon allows sharp lines, matte or gloss finish, and a choice of six shell colours with silver or gold plating.
Both materials take lettering, a dedication, a community emblem and a crown.
KADOSH³ Carbon Architecture™
Not carbon trim. A carbon structure. The body itself is a carbon-fibre composite engineered from the outset around the requirements of a Torah case.
The new-generation layup is 3K / 12K / 3K: outer 3K plies for a fine, precise surface and a 12K core for structural efficiency.
The layup is vacuum-bagged and autoclave cured through a controlled cycle of heat, vacuum and external pressure. This consolidates the plies and reduces trapped air and internal voids.
Compared with the previous six-ply 6K construction, the new generation reduced body weight by approximately 5%.
After curing the work is manual: flattening, staged sanding, and the final finish — matte or gloss — chosen at order time.
Frequently asked
- What is the price difference between carbon and wood?
- A wooden case starts at 19,000 ILS. A carbon case has a 40,000 ILS base price, and for clients who also commission the writing of the scroll with us it never goes below 29,000 ILS. In both materials the final figure depends on dimensions, design and finish.
- Does carbon last longer than wood?
- Structurally carbon is more resistant to humidity and temperature swings and to intensive use. A wooden case kept under correct conditions and cared for also serves for many years.
- Is the warranty different?
- Yes. Carbon cases are covered on the case body and structure; wooden cases carry one year on the case body. Both under correct storage and use conditions.
Still deciding? We can help
Tell us the frequency of use, the room conditions, the character of the ark and the budget, and we will present both options with dimensions and price.